OBDSTAR X300 DP Plus Program 2021 GMC YUKON Prox All Keys Lost via CAN FD Adapter

The least expensive way to program new proximity on this 2021 GMC YUKON when all keys lost should be OBDSTAR X300 DP PLUS (key master dp plus) and CAN FD GM adapter. You just need OEM GM key, no dealer code needed. It is gonna be so much cheaper way.

The GM adapter is compatible with the following new GM models:

Brand	Model	Year
Cadillac	Escalade	2021
	CT4
	CT5	2020
Chevrolet	TRAX/TRACKER(4A)
	CAVALIER/ONIX(4A)
	Tahoe	2021
	Silverado
	Suburban
GMC	Yukon
	Sierra
	Denali
Buick	Envision
	GL8(LSY)

Let’s get started.
Get right into IMMO to start programming this new OEM key proximity for this vehicle.
Before you start, connect x300dp plus to WiFI, constantly available Hotspot or Local signal. Online calculation requires network connection.
Go to update make sure you have both gm data as well as the gm IMMO software V33.24 or above.

Connect CAN FD adapter to the OBDB port using OBD cable and OBDII cable
Select IMMO, then under American’s GM and GM V33.30

Next, select Program keys – GMC – USA Canada – Yukon – Proximity – 2021 – Without Pin Code – All Keys Lost

Choose Enter to erase all the keys on the system
Ensure CAN FD GM adapter is in place to continue
Press the Push to Start button continually or open and close door every 10 seconds during communication

The system is searching the key
This keeps anti-theft from locking the system and canceling the process.

Once accessories and Dash light up, you have entered the anti-theft system.
10 minutes wait mandatory

after 10 minutes theft deterrent system will be deactivated.confirm old key deletion and continue to add new keys now we start to add new key to the system.program new key 1 of 2 into Vehicle signal coil located in the Control driver cup holder

On screen read “Ready for Key 1”, press Push to start button for 2 seconds to add key

When screen reads “Ready for Key 2”, replace key 1 and press Push to start button for 2 seconds to add key

When screen reads “Ready for Key 3”,all keys are programmed, you can exit the system.

confirm desired key number and exit

once the system configures, press and hold Start-Stop button 16 seconds to close key learning

Key learning complete
Turn off ignition switch, open and close door just once.

when the loading car is completed, the system is fully closed.
Then test all key buttons, functions and prox start.
All working. This is a super easy and cheap way to get it done.

OBDSTAR X300 DP Plus Kills Nissan Qashqai 2015 BCM

Problem:

My client asked to add a new key to his Nissan qashqai 2015. I followed the OBDSTAR X300 DP PLUS operation, everything is OK. I touched the Nissan logo on the start stop button and immediately turned on the dashboard. later he asked me for another key (3) i did the same procedure but this time do not add any key. beeps and does nothing. with the new key the buttons still open and close the doors but when I try to get the car to work it says to turn the wheel and press the start-stop and do nothing. but I hear a noise like a click coming from the fuses. at other times key id fault appears. Any ideas?

BCM type

Obdstar Nissan Qashqai 2015 Bcm

Here attached some operation photos

Suggestions & Solutions:

Your BCM is in black list.

You should not ignore the OBDSTAR warning message.

“Do not perform key programming on BCMs with part number: 284B1-4CB1A or 284B1-4CB0A or 28B4B1-4BY1A”

These BCMs are in black list. OBDSTAR won’t be able to program keys for these BCMs.

the list has grown since last listed , bcms that carry a risk include:

4B0A
3ZP0A
4CB1A
4CB2A
4CB3A
4CB4A
4CB5A
4CE1A

Tips on Nissan BCM key programming:

1) Always use battery support to maintain voltage at around 13.8 volts , battery support not booster or jump leads.

2) Always read the bcm serial before doing anything , if on the list you then decide if its worth the risk knowing what it will cost if it goes tits up , in fact even if not on list you decide if worth the risk.

3) if having a punt on it , just code in the original key on its own first , if it goes back in with no issues , you then decide again if worth the risk , if it doesnt go in then you have killed it

If already bricked the BCM, here’s some solutions:

1) Few months ago i passed like u now but i paid 550 for AVDI Nissan key programming and solve my problem online programming
In my opinion BCM is learning mode check for someone in your region with AVDI with nissan module activate or any other to help you first.

2). Dealer changed BCM, ECU and ELV + keys. From few experience around 2500euro from your pocket.

FYI:

OBDSTAR X300DP plus supported Nissan Qashqai list

AFRICA	QASHQAI	BLADE	2009-2014
ASIA	QASHQAI	PROXIMITY	2008-
AUSTRALIA	QASHQAI	BLADE	2013-2017
AUSTRALIA	QASHQAI	PROXIMITY	2013-
EUROPE	QASHQAI	BLADE	2014-2018
EUROPE	QASHQAI	BLADE	2009-2013
EUROPE	QASHQAI	BLADE	2007-2009
EUROPE	QASHQAI	PROXIMITY	2008-2013
EUROPE	QASHQAI	PROXIMITY	2014-
MIDDLE EAST	QASHQAI	BLADE	2009-2014
SOUTH AMERICA	QASHQAI	PROXIMITY	2014-