Jeep Grand Cherokee 2014 Online Pincode Reading by Xtool X100 Pad2
Xtool X100 Pad2 is able to read Pincode online for Jeep Grand Cherokee 2014.
Question: without internet it doesn’t get code?
Answer: doesn’t give it
connects cell phone data or wifi and internet extract Pin Code if you don’t give it you will have to use other equipment or buy it already flat.
If XTOOL X100 Pad2 failed to extract pincode, you have to buy the code.
Jeep Function Table:
| Car series System type | Paragraph | Contains models | Function menu | |||
|
Immobilizer/Fobik(WCM)
| Auto | Auto | ||||
| Manual CAN Auto | 1.Read PIN Code 2.Erase Key 3.Program Blank Key 4.Program Old Key 5.Number of key(s) | |||||
| CAN Type 1 | 1.Number of keys2.Program old keys3.Program new keys4.Erase keys5.Program remote | |||||
| CAN Type 2 | 1.Live Data 2.Program old key 3.Program new key 4.Erase keys 5.Read security code 6.Repalce PCM 7.Replace WCM 8.Change PCM VIN | |||||
| CAN Type 3 | ||||||
| CAN Type 4 | ||||||
| VPW Type 5 | 1.Program keys 2.Erase keys 3.Change VIN 4.PCM replace 5.SKM replace | |||||
| Proximity/Fobik(RFH) |
| 2014- | 1.Add smart key 2.Erase smart keys 3.Replace RFH Module 4.Read Pin Code | |||
| Cherokee | 2014-2018 | 1.Read Pin Code 2.Program keys 3.Erase keys | ||||
| 2019- | 1.Read PIN Code 2.Program Smart Key 3.Erase Smart Key 4.Number of key(s) | |||||
| Renegade | 2015- | 1.Read Pin Code 2.Program keys 3.Erase keys | ||||
| Compass | 1.Read Pin Code 2.Program keys 3.Erase keys | |||||
| Commander | 2019- | 1.Read PIN Code2.Program Smart Key3.Erase Smart Key4.Number of key(s) | ||||
| Fobik Keyless Go | 1.Synchronous smart key | |||||
| Remote | G.Cherokee | 2001-2003 | 1.Program remotes | |||
| Liberty | 2002-2004 | 1.Program remotes | ||||
OBDSTAR X300 DP Plus Program 2021 GMC YUKON Prox All Keys Lost via CAN FD Adapter
The least expensive way to program new proximity on this 2021 GMC YUKON when all keys lost should be OBDSTAR X300 DP PLUS (key master dp plus) and CAN FD GM adapter. You just need OEM GM key, no dealer code needed. It is gonna be so much cheaper way.
The GM adapter is compatible with the following new GM models:
| Brand | Model | Year |
| Cadillac | Escalade | 2021 |
| CT4 | ||
| CT5 | 2020 | |
| Chevrolet | TRAX/TRACKER(4A) | |
| CAVALIER/ONIX(4A) | ||
| Tahoe | 2021 | |
| Silverado | ||
| Suburban | ||
| GMC | Yukon | |
| Sierra | ||
| Denali | ||
| Buick | Envision | |
| GL8(LSY) |
Let’s get started.
Get right into IMMO to start programming this new OEM key proximity for this vehicle.
Before you start, connect x300dp plus to WiFI, constantly available Hotspot or Local signal. Online calculation requires network connection.
Go to update make sure you have both gm data as well as the gm IMMO software V33.24 or above.
Connect CAN FD adapter to the OBDB port using OBD cable and OBDII cable
Select IMMO, then under American’s GM and GM V33.30
Next, select Program keys – GMC – USA Canada – Yukon – Proximity – 2021 – Without Pin Code – All Keys Lost
Choose Enter to erase all the keys on the system
Ensure CAN FD GM adapter is in place to continue
Press the Push to Start button continually or open and close door every 10 seconds during communication
The system is searching the key
This keeps anti-theft from locking the system and canceling the process.
Once accessories and Dash light up, you have entered the anti-theft system.
10 minutes wait mandatory
after 10 minutes theft deterrent system will be deactivated.confirm old key deletion and continue to add new keys now we start to add new key to the system.program new key 1 of 2 into Vehicle signal coil located in the Control driver cup holder
On screen read “Ready for Key 1”, press Push to start button for 2 seconds to add key
When screen reads “Ready for Key 2”, replace key 1 and press Push to start button for 2 seconds to add key
When screen reads “Ready for Key 3”,all keys are programmed, you can exit the system.
confirm desired key number and exit
once the system configures, press and hold Start-Stop button 16 seconds to close key learning
Key learning complete
Turn off ignition switch, open and close door just once.
when the loading car is completed, the system is fully closed.
Then test all key buttons, functions and prox start.
All working. This is a super easy and cheap way to get it done.
Super MB Pro M6 vs. C4 vs. C6
Do you know how to choose MB Star Diagnostic Tool? Here we have picked out 4 to make a comparison. Let’s find what are the differences between them. This post is available with Mercede Benz diagnostic tools, include reviews and comparison of Benz VCI C6, Benz OEM C6, Benz ECOM, SD Connect C4, SD Connect C4 Plus Doip, Xentry Connect C5 Doip.Super MB Pro M6 vs. MB SD C4 Plus vs. SD Connect C4 vs. OEM MB C6
MB diagnostic tool reviews:
| Product | Super MB Pro M6 | MB SD Connect C4 Plus | SD Connect C4 | OEM MB C6 |
 |  |  |  | |
| Diagnosis Full System | YES | YES | YES | YES |
| Online Programe | YES | YES | YES | YES |
| Offline Programe | YES | YES | YES | NO |
| Brush to hide | YES | YES | YES | YES |
| Maintenance service | YES | YES | YES | YES |
| Xentry | YES | YES | YES | YES |
| DAS | YES | YES | YES | YES |
| HHTWIN | YES | YES | YES | NO |
| EPC | YES | YES | YES | YES |
| WIS | YES | YES | YES | YES |
| Vediamo | YES | YES | YES | NO |
| DTS Monaco | YES | YES | YES | YES |
| Star Finder | YES | YES | YES | YES |
| PL73 | YES | YES | YES | YES |
| SDmedia | YES | YES | YES | YES |
| Doip | YES | YES | NO | YES |
| Truck/BUS | YES | YES | YES | Portion |
| Firmware Update | YES | YES | YES（Need to install batteries） | YES |
| wire | Direct connection | Direct connection | Point to point | Direct connection |
| wireless | LAN | LAN | LAN | LAN/usb Cable |
| Software Version | 2021.06 | 2021.06 | 2021.06 | 2021.06 |
| Hardware Version | OS:2.3, CSD:2.11 | OS:2.3, CSD:2.11 | OS:2.3, CSD:2.11 | 1.84 |
| Heat dissipation | Heat sink + fan | Heat sink | NO | NO |
| Software Language (Can switch directly) | ENGLISH, BULGARIAN, DANISH, GREEK, SPANISH, FRENCH, ITALIAN, KOREAN, POLISH, ROMANUAN, SERBO-CROATIAN, TURKISH, CZECH, GERMAN, FINISH, HYNGARIAN, JAPANESE, DUTCH, PORTUGUESE, RUSSIAN, SWEDISH, CHINESE | |||
Super MB Pro M6
1. Perfectly replaces normal MB SD C4/C5
2. Supports Original Benz Dealer Diagnostic Software
3. Supports firmware update without installing the battery
4. Support Mercedes-Benz models, covering 12v car, 24v diesel truck & bus, MPV etc.
Benz VCI C6:
Benz VCI C6 OEM Xentry Mercedes Diagnostic Tool with Encrypted Dongle and Keygen, support new Mercedes Benz model and Doip protocol.
Mercedes Benz C6:
Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
Mercedes Benz eCOM:
Mercedes Benz eCOM DoIP Box Multiplexer Kit Support DoIP for latest E and S series, MB eCOM DoIP diagnostic C5 Xentry Perfect for Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5
Sd Conenct C4:
New DOIP MB SD C4 Plus Mercedes Benz diagnostic tool is the only C4, support new Mercedes with doip, no battery need for firmware update. This Doip Benz Star C4 has better quality, wireless connection is stable, It’s waterproof, shockproof and tamper proof. Can work with original Mercedes Benz software.
SD Connect C4 Plus Doip:
Doip MB SD C4 Mercedes Benz Star Diagnosis Tool with Lenovo X220 Laptop,newest V2019.12 500GB Xentry Openshell XDOS software is pre-installed and activated, ready to use. Buy this bundle sales, not only help you save money, but also save time.
MB SD Connect C5 with DTS Monaco & Vediamo:
MB SD Connect C5 Support Wireless and Lan cable connection, With UDS Chip, support both K Line and CAN BUS Protocol, but also UDS Protocol,support Mercedes Benz cars and trucks after year 2000,Software will be installed and activated well before shipping, you can use it directly after you get it.
https://mbstarscanner.blogspot.com/2021/08/super-mb-pro-m6-vs-c4-vs-c6.html
Launch Xprog 3 Key Programmer User Manual
Launch Xprog 3 all-in-one key programmer, a powerful and multi-functional chip reading device can reads & writes most Engine/ Gearbox ECUs without disassembling the shell. Supports Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. works with X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII.
Launch Xprog 3 Highlight
1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
4. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
5. Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
Launch Xprog 3 Powerful Functions
* VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
* VW/AUDI MQB platform gearbox ECU replacement or cloning.
* ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
* Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
* BMW E chassis 8HP gearbox ECU reprogramming to empty.
* Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
* Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
* Covers common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
* ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
Launch Xprog 3 Supports Vehicle Brand
VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… More models continue to be updated.
Supports Chip Brand
Supports EEPROM Brand
Launch Xprog 3 Operation Connection
If you want to know more about Launch X431 , please contact us sales@obd2tool.com.
https://launchscanner.blogspot.com/2021/08/launch-xprog-3-key-programmer-user.html