How to Solve Laptop Can’t See VAS6154 Interface

WIFI VAS6154 VAG diagnstic tool with OKI chips, supports diagnosis and programming/coding for all VW, Audi, Skoda erc. including NEW & FUTURE MODElS under production. Comes with VXDIAG driver, with wireless communication technology, can achieve wireless communication of the vehicle and diagnostic interface. This interface can be retrofitted as Porsche head as well, but try your risk, we don’t provide technical support.

WIFI VAS6154 Diagnostic Tool Highlight
1.Multi-language (CD Software): English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russian, Greek, Chinese
2.Operating system: V-as 6154 works perfect with windows10​.
3.Support WIFI & USB Connection: With wireless communication technology, can achieve wireless communication of the vehicle and diagnostic interface
4. Support for VW for Audi for Skoda vehicles NEW & FUTURE MODLES under production.
5.With OKI Chip, support UDS protocol
6.Is the latest interface for the diagnostic and programming applications VAG ODIS (Service) and ODIS-E (Engineering), can replace VAS5054

Difference Between VAS6154 and VAS5054A
1. Connection method:
V-AS 6154: connected via USB, WIFI
V-AS 5054: connected via USB, Bluetooth

2. Compatiable System:
V-AS 6154: Work with Win10 system perfectly
V-AS 5054: Better to have win7, with our win10 software can work well
PC Can’t See VAS6154 Interface When Connecting? What’s The Solution?

Many customers said that :”My laptop can’t see my interface were it driver for that?”

Solution: install vas6154 drive!

Download Link : https://mega.nz/file/hK4EHC5Z#UDTKR4VsMEnqn644Kb_YrJBa__1h845JOG4d2tBz7mA

How to use Autel MaxiIM IM608 Program 2014 Audi A6 AKL

Car model and year: 2014 Audi A6 with all keys lost, it is proximity key and does not has slot. Car has bcm2 unencrypted.

Tool to use: Autel IM608

Autel wants this done to get immo info. Has anyone had success with this Procedure?

Autel official reply:

Currently, the pin and cs of VW A6 Immo4 cannot be calculated and the user needs to obtain it from others.

Here I share one user’s feedback:

I did, you need read bcm on bench, write key in dump to can turn ignition on, then read ecu and tcu over abs CAN-L and CAN-H.

Then I unlock key with KEYDIY KD-X2 and make dealer key again and adopt on car.

BTW, you don’t need data from elv.

FYI, I use cable from MPPS, only +12, GND, CAN-L-H.

I mean unlock key with KEYDIY KD-X2 (shown as following image):

For the proximity key with no slot:

Put the jumper on 1 and 16 and ignitions. I already have bcm2 immo data. That was easy.

If you already have information about BCM2 you should know that you can now reprogram keys you do not need to do the other procedure, unless you need to do an ECU adaptation but you can do that with a testing harness that you should also know how to do it.

Yup just went thru all that fun stuff?

good to know. . So the AAC001 cable (comes with the xp400 kit I believe)  just requires can h and l and that’s it. I looked at diagram looks like it taps into the txu/ecu through harness directly so that’s pretty cool.