How to get ODIS 4.3.3 For VAS 5054A

Bad clones of VAS5054A not gonna work with this version 4.3.3.

Even those that works with ODIS 4.2.3.

I mean, VAS5054a clones work on 4.3.3 with PDU 041 only. But not working with PDU 042

For bad clones just need to downgrade PDU from 042 to 041

Remove EDIC 1.20.42 from PC

Then install this older EDIC attached:

https://mega.nz/#!URV1nLwa!mn6xoEUmQeyCwhes1tDB6qvp20trgDUYy6BVNxRnLUk

If you should check post install (before you plug in your device) in Add/Remove programs you should see Softing D-PDU API V1.20.042 EDIC_D_PDU_API_OE/OS
Remove these from PC and reboot (just in case)
Install the EDIC provided above with version 041
Then plug in your device and test

I myself have not tested the above, but I think I works

But if you want use ODIS easily for VAS 5054A clone head, choose ODIS 4.2.3 From obd2tool.com. It’s a tested version, confirmed to work no issues

Good luck!

MOPAR MicroPod II

Good things come in small packages, like Chrysler’s latest and greatest diagnostic interface. This dongle-style device is the same diagnostic and programming tool the dealerships are using. It offers 100 percent CAN coverage for Chrysler, Dodge,Jeep and Fiat vehicle platforms. It replaces your StarMobile, StarScan, and witech Micropod 2.

Includes:
MicroPod II, USB MicroPod II connector
cable, wi-TECH Application Software and carrying case.

MOPAR MicroPod II Features:
* Supports all the latest technologies and vehicle platforms including the latest Chrysler/Fiat vehicles.
* Works as a direct replacement for the wiTECH VCI pod.
* No Smart cables required.

MicroPod II + Tablet
wiTECH 2 introduces fully wireless usage of your MicroPOD II with iOS or Android tablets and phones! wiTECH 2.0 allows wireless connectivity through any device with a web browser!

MicroPOD II Remote Trigger
The MicroPod II Trigger allows the technician to use the MicroPod’s Flight Recorder capabilities. This trigger is used to start and stop recording of a customized template which is set up using the wiTECH Diagnostic Application.

wiTECH 2.0 diagnostic software is the state of the art diagnostic system for Dodge, Chrysler, Jeep and North American Fiat vehicles. Professional Diagnostic Tool wiTECH 2.0 allows fully wireless connectivity to perform diagnostics, reprogramming and security functions.

Any mobile device with a browser will run the software, including Android and iOS phones and tablets. A Mopar Tech Authority account is required, as well as a secured MicroPod II.

This tool is used for a variety of model years but is required for all vehicles utilizing CAN operations.

The list to the right shows some of the many functions of OBD2 Scanner wiTECH 2.0.

*Increased speed
*Enhanced wireless security
*Full wireless operation
*No cables required
*Enables mobile devices
*Rapid device recovery
*No PC required
*More reliable ECU reprogramming
*Automatic WiFi reconnection
*Automated Flash recovery

How to fix the CAT ET SIS error

This means you have communication error between your CAT II / III adapter and the CAT ET SiS software setup. Usually it is a simple fix.

– In the CAT software go to UTILITIES   =>   PREFERENCES   =>  COMMUNICATIONS
– CHOOSE: CATERPILLAR COM ADAPTER II
– CHOOSE under PORTS: COM 7
– Click “OK”
– Restart the computer and usually that is all you need to do.

Picture

But if the above steps do not work, then your adapter is setup on a different COM PORT. In which case watch the video below on how to find which com port your CAT II / III  adapter is using and match it with the Cat ET SIS software to fix the CAT #142 error message.

http://chinaobdtool.net/2018/06/25/how-to-fix-the-cat-et-sis-error/

How to change RPO F45 option codes to Corvette’ with TECH 2

This details out what exactly is needed to add/change RPO option codes to existing 1997+ Corvette’s, using a Tech 2 scan tool.

These instructions will also help owners of F45 real time dampening suspension option convert to regular shocks that don’t have sensors built in. Right now people are paying upwards of $200.00 for emulators that plug into the wiring harness to trick the BCM. A simple solution is to just go into the BCM’s function and toggle off the F45 suspension options. No codes will be set and the car will not go into reduced engine power mode.

Defrost vent:

Step 1: Obtain a working TECH2 (original or HQ clone- both ok)

note: Tech 2 knockoff has many types and here is a chart for you to know all.

Step 3: Enter Diagnostics menu

Step 4: Enter year of car

Step 5: Enter Passenger Car menu

Step 6: Select Body from the menu

Step 7: Select Y body from menu

Step 8: Select Y body from menu

Step 9: Select transmission type

Step 10: Enter body control module menu for adding/deleting option codes such as automatic headlamps,F45 suspension.

Step 11: Enter Special Functions menu

Step 12: Enter BCM RPO Reprogram

Step 13: Enter cars country of origin

Step 14: Toggle functions on and off. The asterisk next to the option code indicates this function has been turned on. Note that the Automatic and Manual HVAC controls are both turned on. This is normal and should be ignored. Go ahead and hit the save option button when you’re done and power off the Best obd2 scanner TECH2.

Note: If your vehicle was built after Feb 02 you may or may not have the sensor installed from the factory required to make the T82 automatic headlamp function by simply turning it on in the cars BCM. A quick way to verify this is to remove (no tools required) the defroster vent on the center of your dash. There should be 2 sensors installed. The sensor on the right is for your climate control and the sensor on the left is for the T82 automatic headlamp control. If this sensor is not present it can be purchased from GM for about $12.00. The part number is 12450121 and it simply snaps into a space already provided on the defroster grill.

Next you need to find the pigtail that plugs into the sensor. It is on the right side of the steering column and has a piece of white tape holding it folded in half. Cut or tear the tape and leave it dangling down.

Now, take a metal clothes hanger, and stick it down through the defroster hole in the dash. You will see a little 1 inch by 1/4 inch slit to slide the hanger through, then force it to the floor. Tape the pigtail to the hanger and pull it back up through the hole in the dash. Then plug it in to the sensor, snap the grill back in and you are done.

Have fun!

Piwis II Tester piwis 2 With CF19 Laptop

New Panamera can only be diagnosed by using Piwis tester 2. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.

This is full set package, including Porsche piwis interface, software V18.10, Panasonic CF19 Laptop ready for use. Automotive diagnostic equipment Porsche PIWIS Tester II PIWIS II Diagnostic Tool, is able to work with Porsche cars from 1996 to 2018 year, special for the Panamera which can only be diagnosed by it..

Porsche Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.

Notice for this Porsche Piwis tester II

1. After finish diagnostic, please quit the connection, and quit to the homepage of the software, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged).
2. This Piwis2 we sell is best quality which is made in Tainwan, and it is Semtec Hardware, which is 100% same as the porsche dealer has, not J2534 hardware, the J2534 FTDI hardware comes with different PCB, and it has no certification make it is not able work with all modules, not support online functions.
3. Certificate is well installed, our Obd2 scan tool Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function.
Porsche piwis 2 comes with Software Version: V18.10
Covers Porsche’s vehicle lists to the whole year long till 2018
Can work with 2014 new cars Porsche Macan and add Porsche wiring diagram as well as service plan.
Software will never expire!!

Our advantages of this Porsche piwis ii tester :

1. Our price is very competitive, nearly the lowest in the market
2. Our computer is the Panasonic Laptop Toughbook CF19 MK1, Intel U2400 1.06GHZ 2GB RAM, which is first released by ICARECU in Jan 2018.
3. The PC screen start with Porsche welcome image
4. Support full languages and 90 days time unlock (Never expire)
5. Support all Porsche cars till 2018, including Porsche Macan
6. Can install Printer